The same durable construction as our original drying wagon...just without the drying plenum. This heavy all steel welded body has a 14Ga. bottom floor with cross bracing.
The 16Ga. sides are supported with vertical channel standards. The 8-ton running gear comes with a ball bearing (turntable) 5th wheel, easy steering and true tracking.
This wagon's area capacity is 515 cubic feet (5 ton). The hoist dump angle is 35 degrees. Its track width is 72-3/4. The above wagon has 9.5L x 15 implement tires. A 55 mph implement tire is also available.
For easier towing, both forward and backward, this single axle version of our 5th wheel dump wagon is the choice. Its track width is 72-3/4". Its area capacity is 515 cubic feet (5 ton). It has an 8-ton running gear and 7-ton hoist with a 35 degree dump angle. An optional grain door is available.
The silage/trash wagon incorporates our Model 1004 wagon and 2' expanded metal extensions for more capacity. It comes with either an expanded metal tailgate or a solid sheet metal tailgate.
This 8-ton, ball bearing (turntable) 5th wheel running gear is the key to our durable wagons. If you don't need a drying or hauling box, this may be purchased separately.
6' X 24' overall dimensions with a 3,600lb capacity, 11 1/2" wide side steps, 3' X 4' monitoring platform, rear hitch for tandem towing and a water cooler bracket. This trailer has a low profile for easy loading. The bins rest on a frame that is 16 1/2" above ground.
The Peerless Heavy Duty Grapples are made of high strength ½” thick tines spaced 8¼” apart. All wear points are made of AR400 steel. They are available in 72” and 84” widths.
This is NOT your typical Light Duty Grapple. It is recommended for small tractors and skid steers up to 50HP with a lift capacity of 1800lbs. It has a single clam design utilizing two 2” bore X 6” stroke cylinders which are made in the USA! All tines and wear points are constructed of ¼” AR400 steel. The structure of the top clamp is reinforced by two 1 ¼” solid steel rods. The main frame tubing is 3/16” thick. Last but not least, this grapple rivals its competitors by boasting an incredible 34 ½” opening.
The Peerless Heavy Duty Root Rake is made of high strength ½” thick tines spaced 8¼” apart. All wear points are made of AR400 steel. The tubing thickness is 3/8”. It is available in 72” and 84” widths.
The Peerless Heavy Duty Low Back Single Hay Spears are compact yet very durable with two stabilizers. Our spears are 49” with a 3500lb. lift capacity. The stabilizers for the single spear are both removable and replaceable.
The Peerless Heavy Duty Low Back Double Bottom Style Hay Spears are compact yet very durable. Our spears are 49” with a 3500lb. lift capacity. The stabilizers for the single spear are both removable and replaceable.
The Peerless Heavy Duty Pallet Fork has a walk-through design which aids the operator in safely while entering or exiting the machine and also improves visibility for the operator. The tine size is 48” x 1.375” with a 4400lb. capacity/tine.
